KEBULEN HEAT SHRINK SYSTEM V FOR MOLDED PARTS
General information
The Kebulen Heat Shrink System V for Molded Parts is a corrosion
protection material which Needs to be procesed hot. It
meets the requirements of DIN EN 12 068 for stress class
C continuous operating temperature up to 30 °C.
Buildup
The Kebulen heat shrink System V consists on the inside of a PE-film coated with a hot-melt adhesive.. Included in the scopeof delivery are a Kebulen heat shrink molded part, Kebutyl puttytape, a two-part cover and two tubular sleeves for the valve andthe connection pipe.
Application
The Kebulen heat shrink System V is used to coat house Service lines with safety relief valves.
Kebulen shrink part S
General information
Kebulen heat shrink moulded part S is a corrosion
protection material which needs to be hot processed.
It meets the requirements of DIN EN 12 068 for stress
class C, continuous operating temperature up to 30 °C.
Assembly
The Kebulen heat shrink moulded part S on the inside
consists of PE film coated with hot melt adhesive.
Included in the scope of delivery are a Kebulen heat
shrink moulded part, Kebutyl putty tape, a two-part
cover and one tubular sleeve for the connection pipe.
Application
The Kebulen shrink moulded part S is used to coat
house service connections with a plug.