Compakt Seals and Wall Sleeves with Fixed/Loose Flange

Constructions with Sealing Sheeting

For constructions with sealing sheeting, seals or wall sleeves with fixed / loose flanges are required in accordance with DIN 18195 T9. A difference is made between pressing water and non pressing water.

PSI Products offers, depending on the application, the appropriate solution: Seal with fixed / loose flange, wall sleeve with fixed/ loose flange or on wall-facesleeve with fixed / loose flange. As standard quality, these products are delivered in galvanized steel, but if requested, can also be supplied in S304 (V2A) or S316 (V4A) stainless steel.

For Subsequent Mounting for Constructions without Sealing Sheeting

Wall penetrations with an eccentric position, wrongly dimensioned core drills/wall sleeves or when the pipes or the building have subsided are always a problem for seals. For constructions without sealing sheeting, PSI Products has on wall-face sleeve in its delivery programme. They can of course also be manufactured in split/open version for retrofit installation. As standard quality, these products are delivered in galvanised steel, at the request of the customer they can be supplied in S304 (V2A) or S316 (V4A) stainless steel.